Coping with summer in Melbourne requires a dependable and functioning central AC system. It’s even better if that cooling unit is also clean and energy efficient. After all, no one likes throwing money out the window. But it’s difficult for an AC unit to perform its best when its original installation was flawed. That’s where BRG Air Systems comes in.
Our customer-focused HVAC company is deeply dedicated to providing comfort in the Melbourne area —a fact easily correlated by our 8 years of service. In that time, we’ve replaced hundreds of old air conditioners with new, more-efficient ones. Through this, we’ve helped your friends and neighbors shave hundreds off their utility bills. In other words, if you’re in the market for an AC replacement in Palm Bay, we’re the local HVAC company you can trust.
We get the job done right the first time, and it’s not done until you’re five-star satisfied. If you receive anything less than perfect service, we invite you to call us at 321.234.4000. We’ll set things right.
We understand the urge to put off AC replacement. It’s expensive and inconvenient. It's also not something most people in Melbourne bother to budget for it. The idea of helping your air conditionerhobble along a little longer is tempting. But, eventually, it’ll have to be replaced. Below are a few signs that your current AC unit is nearing the end of its service life:
If you notice any of these symptoms, place a call to 321.234.4000 right away! Tackling the issue head on can mean you end up with a bill for AC repair in Melbourne and can put off getting a new unit a little longer. Waiting, meanwhile, is likely to lead to snowballing and worse issues down the road.
One of the biggest causes of wasteful air conditioners is improper sizing and installation. A lot of AC repair calls in Melbourne could have been prevented with a little bit of forethought. That's why BRG Air Systems takes time to properly determine your home's specific needs. We also will recommend things like air handlers, air filtration systems, and zoning up front to save you money on total installation costs.
Before replacing your AC system, we conduct a load calculation to determine the proper size of the replacement unit. We also take a look at your duct work and determine if any repairs are needed. When the number crunching ends, we present you with an AC installation quote.
In it, we price out everything from new condensers to updated drain lines and updated thermostats. We will also take time to discuss your budget and explore rebate, financing, and coupon options.
When done, we’ll have a proposal that ensures the system installed meets you and your family’s needs. Once all the paperwork is signed, our HVAC expert will take down your appointment preferences and get you scheduled. We look forward to adding you to our list of satisfied customers in the Melbourne area.
The time has arrived to replace or install your new air conditioning system. Understandably, you're a little stressed out. Many homeowners aren’t sure what happens on AC installation day. How long will it take? Is there anything you need to do to prepair for AC replacement in Melbourne? To help ease your concerns, here is how BRG Air Systems gets the job done:
After the initial test, our HVAC technician will do a few temperature checks to make sure everything is performing as expected. When diagnostics are complete, they’ll pick up their tools and remove the drop cloth. Then you, in renewed comfort, can flop back in the armchair.
First, let’s start with a congratulations! We hope your new home is everything you dreamed of. Our local HVAC company is proud to work with a number of home builders and remodelers in the Melbourne area. So, we're often called upon to design and install new-build systems.
The process for installing a new AC system in Melbourne is similar to replacing one. The same calculations are made and the same steps taken to prevent safety issues. The main difference comes during the set-up process. When a clean installation happens, we’ll also be responsible for designing a properly functioning system of ductwork. Because it’s a new build, there’s no old air conditioner to be disposed of.
If you want your new AC unit installed correctly, you can’t go wrong with BRG Air Systems LLC. We’ve been helping people in the Melbourne area cool their homes for over 8 years. This experience means we have the expertise necessary to properly install and configure a variety of HVAC systems. When you work with us, you get an air conditioner prepared to reach the end of its lifespan. Our simplified installation process helps make the entire process stress-free.
Give us a call at (321) 234-4000 for a free quote on AC installation in Satellite Beach or Melbourne.
It typically does! Replacing or installing a new air conditioner in Melbourne can raise your home's value by as much as 10 percent. This value depends on the efficiency and features of the new unit. In some markets, you can't even sell a home that doesn't have a cooling system installed. So, even if you plan to sell in the near future, you might want to consider footing the bill for an updated air conditioner.
A lot of homeowners think that bigger is better when it comes to air conditioning in Melbourne. But that's not true. While an oversized air conditioner will cool your house more quickly, it will use more electricity to do so. It'll also struggle to remove the humidity from the air. Though you might not like your AC unit in Melbourne running for hours on end, long cycles are better for your wallet and home than short ones.
While the typical home in Melbourne likely has a SEER 14 unit, it's worth looking into ones with a higher SEER rating. Anything above 16 SEER is considered eco-friendly and can help you save on long-term heating costs. Government rebates are available to help lessen the price difference between a low SEER unit and a more efficient one. For information on what AC discounts you might be eligible for, give us a call at 321.234.4000.
Air conditioners have both interior and exterior components. Some homeowners in Melbourne think replacing just one of those is a great way to lessen AC repair and installation costs. It's not. Having mismatched components can lead to frequent repairs, heightened energy bills, and lowered efficiency. Though the price tag might look scary, doing both sides of your cooling system will ultimately save you money.
We suggest you get multiple quotes on AC replacement in Satellite Beach or Melbourne. This is the best way to ensure you get a fair deal. Do note, however, that you need to be comparing apples to apples. Does the other company offer a warranty as good as ours? Is the unit as good? How long have they been in business? You will need to keep these things in mind as you make your decision. We invite you to check out our financing page and special offers page to see what kind of deals we're currently offering.
While you might be tempted to repair or install your own air conditioner in Melbourne, you shouldn't. There's a lot that goes into sizing, installing, and testing an air conditioner. Beneath that shell, there are a number of electronic and chemical components. Tinkering with these can lead to injuries and even death. So, unless you have the proper certifications, we suggest leaving AC replacement in Melbourne to the HVAC experts at BRG Air Systems LLC.
As mentioned earlier, once your air conditioner gets past 10 or 15 years old, it's time to start budgeting for a new one. Like with a lot of other products, HVAC equipment pricing is cyclical. For better AC deals, we suggest shopping before summer hits its stride. When winter temperatures start breaking toward spring, a lot of local HVAC contractors may be slower and scheduling is a lot easier. It's also a period where many financing deals are offered. For Florida, this means anywhere from February to April.
Shopping for a pair of shoes on Amazon is one thing. Trying to purchase a new AC unit in Melbourne is another. You should always get a quote from a licensed HVAC contractor. They have the skills needed to properly measure your home to calculate the equipment that is optimal for your dynamics. There are a few things, however, we'd recommend everyone:
There's no single answer to this question. Every home in Melbourne is different. Things like local codes, square footage, building materials, drafts, wall direction, and even homeowner association rules can affect selection of the installation area. For that reason, there's no secret formula to picking the right spot. We recommending looking for:
At the end of the day, however, the best way to find the perfect spot is to reach out to Melbourne's AC service experts—BRG Air Systems .
A simple AC replacement and installation in Melbourne typically takes between four and six hours. This estimate may increase if the installation team has to flush the line or add brackets. If you want a more accurate estimate of how long it'll take to put in your new AC unit, just ask our technician. They will be happy to walk you through the process.
If you're willing to invest in ductwork and design adjustments, any home in Melbourne can enjoy the benefits of central air. But, before you call your local building contractor, give 321.234.4000 a jingle first. We'll not only walk you through the installation process, but we'll help you explore alternative cooling options as well. Things like ductless mini-splits, whole house fans, swamp coolers, and heat pumps can give you many of the same benefits without the drastic upfront cost.